VPG+ Visual production guide
Guide your production
VPG+ is designed to assist operators during the assembly and rework processes. Operators are driven through the different tightening sequences by VPG+. The software selects automatically the correct tightening program and the associated tool for the operation, displays the necessary instructions for the operator and the picture of the operations with their status (to be tightened, OK and NOK). In the rework mode the user can select manually the sequences. VPG+ gives the possibility to check the status and results of all tightening associated to VIN number for every single vehicleproduct. VPG+ supports the two most common network databases, Oracle and SQL Server.
Visual Production Guide
The above picture shows the working way of VPG+: Through a special synchronization mode the system is able to work even if the network is not always available. From one PC it is possible to configure the complete production line and to perform the synchronization of unlimited number of stations with a SINGLE CLICK. When the station receives the cycle start, selects and enables the tool to perform the sequence. After each tightening the tool sends back the results to the station. If the network is available the station will send immediately the result to the network database, If the network for any reason is not available, the station will keep locally the results until the network connection is restored. This guarantees no data lost and no production interruptions.